| Model |
EGX-30
|
| Table |
305 mm (X) x 205 mm (Y) (12 in. x 8-1/16 in.)
|
| Max. operation area |
305 mm (X) x 205 mm (Y) (12 in. x 8-1/16 in.)
|
| Feed rate |
X, Y-axis: Max. 3.0 m (118-1/16 in.)/min. (50 mm
(1-15/16 in.)/sec.)
|
| Mechanical resolution |
0.01 mm (0.000394 in.)/step 0.00125 mm (0.0000492
in.)/step ( micro-step control )
|
| Software resolution |
0.01 mm (0.000394 in.)/step
|
| Distance accuracy |
Whichever the greater value of 0.1 mm ( 0.00394 in.)
or 0.5% of moving distance
|
| Right-angle accuracy |
+/-1 mm (305 mm) ( +/-0.0394 in. (12-1/16 in.))
|
Spindle motor
|
15 W ( DC motor )
|
| Revolution speed |
5,000 --- 10,000 rpm
|
Engraving tool mounting diameter
|
3.175 mm (1/8 in.)
|
| Interface |
Parallel (in compliance with the specification of
Centronics)
Serial (under RS-232C standard) Automatic switching
|
| Instruction system |
CAMM-GL II mode2
|
Power consumption
|
0.6 A / 117 V 0.4 A / 220 to 230 V 0.4 A / 230
to 240 V
|
| Acoustic noise level |
Operation mode: 70 dB (A) or less Standby mode: 40 dB
(A) or less
(According to ISO 7779)
|
External dimensions
|
513 mm (W) x 491 mm (D) x 217 mm (H) (20-1/4 in.(W) x
19-3/8 in.(D) x 8-9/16 in. (H) )
|
Weight
|
15.5 kg (34.2 lb.)
|
Operation temperature
|
5 to 40°C (41 to 104° F)
|
Operation humidity
|
35 to 75% ( no condensation )
|
| Accessories |
Power cord: 1, Dust collector hose and duct: 1,
Engraving cutter: 1, Engraving-tool holder: 1, Diamond
cutter adapter: 1, Hexagonal screw driver: 1, Spanner:
1, Hexagonal wrench: 1, Test material: 1, Adhesive
sheet for securing material: 1, Roland Software
package CD-ROM: 1, User's manual: 1
|
