|
Model number |
Description (unit=mm) |
| 3.175 (1/8") cutters for general engraving on acrylic and resin material |
|
ZEC-A2013 |
Cemented carbide dia = 3.175, 114(L) x 0.127(W) |
ZEC-A2025 |
Cemented carbide dia = 3.175, 114(L) x 0.254(W) |
ZEC-A2051 |
Cemented carbide dia = 3.175, 114(L) x 0.508(W) |
ZEC-A2076 |
Cemented carbide dia = 3.175, 114(L) x 0.762(W) |
| Parallel cutters for engraving large characters (not intended for deep engracing) on acrylic and resin material |
|
ZEC-A2150 |
Cemented carbide dia = 3.175, 114(L) x 1.52(W) |
ZEC-A2190 |
Cemented carbide dia = 3.175, 114(L) x 1.91(W) |
ZEC-A2230 |
Cemented carbide dia = 3.175, 114(L) x 2.29(W) |
ZEC-A2320 |
Cemented carbide dia = 3.175, 114(L) x 3.175(W) |
| Quarter round cutters for engraving acrylic and resin materials with high speed |
|
ZEC-A2013-QR |
Cemented carbide dia = 3.175, 114(L) x 0.13(W) |
ZEC-A2025-QR |
Cemented carbide dia = 3.175, 114(L) x 0.25(W) |
| Diamond scraper for scribing names and numbers on aluminum or brass |
|
ZDC-A2000 |
Diamond dia = 3.175, 127(L).
Burnishing attachment (ZB-20) is required. |
